Designed For Ice Rinks Up To 1200 Square Meters.
Model: Sport Ice248 Li (48 Volt System) Standard Color White.
Designed For Ice Rinks Up To 1200 Square Meters.
Model: Sport Ice248 Li (48 Volt System) Standard Color White.
product data
01
Length (Overall):2870mm
Width (Conditioner):1620mm
Width (Body):1270mm Height (Snow Tank Closed) 1828mm
Drive Train
Wheelbase:1524mm
Wheel Track:1093mmf/1012mm R
Ground Speed:16kph Max
02
Machine Weight (Empty):1345 kg Machine Weight (Full Water): 1627 kg
03
1.13 Cubic Meter Capacity
Steel Fabricated Tank With Hydraulic Lift Dump Cylinders Hydraulically Opened Snow Tank Lid
Hydraulic Dumping Of Snow Tank
04
284-liter Capacity Aluminum Water Tank
Manual Control Valve For Control Of Gravity Fed Water System Optional Water Level Sight Gauge
05
1600 Mm (63.0”) Wide, Shaving Blade 1524 (60.0”) Wide.
Horizontal Screw Conveyor, 203 Mm (8”) With Double Flighting In Snow Transfer Area. Down Pressure Springs And Water Distribution Pipe.
Blade Bar With Operator-controlled Blade Depth Adjusting Handwheel. Plastic Wear Strips.
Chain Drive Auger From Honor Gear Motor; Honor Gear Aluminum Towel Bar And Spreader Cloth.
06
48v Smart Charger
Lifepo4 Battery Package 48v, 230ah.
Smart Charger For Lithium Batteries; 110 Vac Or 220 Vac Input; Include Battery Monitoring System (Bms).
Description
MACHINE LOOMS
All machine looms use Deutsch waterproof connectors, harnesses enclosed in split loom conduit.
HYDRAULIC SYSTEM
30-liter hydraulic oil tank with filler/breather, suction strainer and return line filtration (10 micron).
The hydraulic oil tank is built with a “passive heat exchanger” system. The oil tank encircles the vertical auger housing so that the snow passing through the vertical auger cools the hydraulic oil. The hydraulic oil heats the auger housing and reduces icing and snow jams in the vertical auger housing.
3 section manually operated control valve provides for operator control of lift bar, auger motors, and dump tank.
The hydraulic flow has an adjustable flow divider with separate relief valve for the steering circuit.
LIFT BAR
Custom designed and fabricated weldment, hydraulically actuated.
Lift bar stroke (and the resulting down pressure)is adjustable via threaded cylinder rod and clevis. Double P.O. check valve manifold “locks” in down pressure for ice shaving performance.
VERTICAL AUGER
152.4 mm (6”)diameter auger enclosed in steel tube, 330 mm (13.0”)dia slinger for superior snow compaction.
Auger is powered by a Sauer SNM motor via a chain drive. Snow breaker, manually operate.
FINAL DRIVE
Wheels/tires: pneumatic tire and wheel combination. 205mm/50-10, tires studded with tungsten tipped ice studs.
Ground Speed: 16 kph (10 mph)maximum.
Graziano rear axle with brakes: D&D Traction motor mounted directly to axle.
STEERING SYSTEM
Danfoss OSPM hydraulic steering control powering a hydraulic steering cylinder, 356 mm (14”)diameter steering wheel.
CONTROLS
Sevcon solid state traction on heat sink with onboard diagnostics.
OPERATOR’S STATION
Operator compartment contains steering wheel, manual brake pedal with parking brake, directional control switch, accelerator type foot pedal for machine ground speed, and light switch, hydraulic control valve levers, water supply control rod, horn button. A digital display for battery discharge information, diagnostics (fault codes)and hour meter.
All weather captain’s chair (armrests); Cup holder.
SAFETY STANDARDS
Safety warning labels applied to machine.
Manual hydraulic hand pump for emergency.
OPTIONAL EQUIPMENT
Board brush system (with brush)
Back up alarm
Water site level
Automatic snow breaker
Heated seat
Snow tank light
12V dash port
Tire wash system
Water pick up system
Reviews
Add a Review
Inquiry Now