Thorough Ice Cleaning Machines Quotation

HYDRAULIC SYSTEM

The hydraulic flow has 28-liter hydraulic oil tank with filler/breather, suction strainer and return line filtration (10 micron). The hydraulic oil tank is built with a “passive heat exchanger” system. The oil tank encircles the vertical auger housing so that the snow passing through the vertical auger cools the hydraulic oil.

The hydraulic oil heats the auger housing and reduces icing and snow jams in the vertical auger housing 2 section manually operated control valve provides for operator control of lift bar and auger motors. An adjustable flow divider with separate relief valve for the steering circuit.

BATTERIES

48V Smart Charger

Lithium battery package 48v, 200ah lifepo4; smart charger for lithium batteries; 110 vac or 220 vac input; include battery monitoring system （bms）.

MACHINE LOOMS

All machine looms use Deutsch waterproof connectors, harnesses enclosed in split loom conduit. ELECTRIC CONTROLS

Sevcon: solid state traction control on heat sink with onboard diagnostics

LIFT BAR

Custom designed and fabricated weldment, hydraulically actuated

lift bar stroke （and the resulting down pressure）is adjustable via threaded cylinder and clevis Double P.O. check valve manifold “locks” in down pressure for ice shaving performance

VERTICAL AUGER

152.4mm （6”） diameter auger enclosed in steel tube, 330 mm （13.0”）dia slinger for superior snow compaction Auger is powered by a Sauer SNM motor via a chain drive

FINAL DRIVE

Wheels/tires: 18* 8.00-12.5 tires studded with ice screws Ground speed: 16kph （10 mph）maximum

Graziano rear axle with brakes; D&D Traction motor mounted directly to axle

STEERING SYSTEM

Danfoss OSPM hydraulic steering control powering a hydraulic steering cylinder, 356mm （14”）diameter steering wheel

OPERATOR’S STATION

Operator compartment contains steering wheel, manual brake pedal with parking brake, directional control switch, accelerator type foot pedal for machine ground speed, light switch, hydraulic control valve levers, water supply control rod, horn button, hydraulic pump on/off switch. A digital display for battery discharge information, diagnostics （fault codes）and hour meter.

All weather captain' s chair （armrests）

SAFETY STANDARDS

Safety warning labels applied to machine

OPTIONS

Pro package （board brush, high rise blade tower, extra blade）

Tire wash system                   

Additional shaving blades                

LED under body lights   

Custom color

STANDARD MANUFACTURER’S WARRANTY

Sport Ice Asia, Inc. hereinafter referred to as Sport Ice, warrants all parts and materials, manufactured by Sport Ice and installed on the ice resurfacer to be free from defects in material and workmanship under normal use for a period of one （1）year, following shipment from our factory to the original user. All parts purchased by Sport Ice and installed on the ice resurfacer will carry the guarantee of their manufacturer. The obligation of Sport Ice under this warranty is limited to replacing at our factory any part or parts supplied by us, which shall, within the warranty period, be returned to us with transportation costs prepaid, and which our examination shall disclose to our satisfaction to have been defective. This warranty being expressly in lieu of all other warranties expressed or implied and all other obligations or liabilities on our part. Sport Ice neither assumes nor authorizes any other person to assume for us any other liability in connection with the sale. Sport Ice reserves the right to inspect service records for evidence of regular maintenance and proper care of the machine. The warranty will not apply to damages or failures resulting from misuse, negligence, accident, alteration or improper service. Sport Ice reserves the right, at any time or times, to revise or modify, discontinue or change any models of the ice resurfacer, or any parts thereof, without notice, and without incurring any liability or obligation to the purchaser. Sport Ice Asia, Inc.

FACTORY TRAINING VISIT

When a machine is shipped outside the Continental PRC, we strongly suggest that a Sport Ice Engineer visit the customer’s facility. This visit will be to train the customer’s personnel in safe machine operation, ice resurfacing procedures, machine maintenance and ice rink operations （when appropriate）.

SPORT ICE BUMBLEBEE